Dust proofing locks in surface fines to minimise airborne dust and protect stock, equipment and air quality. Ideal for warehouses, workshops, storage and renovated garages where constant dusting is a problem.
A penetrating densifier/sealer that hardens the surface paste and binds loose fines to reduce ongoing dusting.
Often several years in light/medium use. High-traffic warehouses may schedule periodic re-coats to maintain performance.
Yes—common systems are low-odour and appropriate for typical commercial storage when cured. We’ll recommend a system to suit your use.
Usually a natural look with a slight sheen increase. If you want a decorative finish, consider polished concrete or epoxy.
Often same day for foot traffic; check product cure for forklifts/vehicles (commonly 24–72 hours).
We’ll first remove failed coatings by grinding, then apply an appropriate dust-proofing/penetrating system.
Send rough measurements and a couple of photos. We often quote the same day.